192.168.1.1 Admin Login

How to login 192.168.1.1 in 5 easy steps

Router Configuration Center

Search This Blog

Tuesday 30 October 2018

How do You set up a DHCP in a Cisco router?

The Dynamic Host Configuration Protocol (DHCP) is a standardized network protocol used on Internet Protocol (IP) networks for dynamically distributing network configuration parameters, such as IP addresses for interfaces and services. With DHCP, computers request IP addresses and networking parameters automatically from a DHCP server, reducing the need for a network administrator or a user to configure these settings manually.
Take a scenario as below
  • Making Cisco Router as DHCP Server
  • Connect Ethernet cable from F 0/0 of router to Switch
  • Connect Ethernet cables from switch to Hosts & select option Obtain IP address Automatically in host
  • Enter following commands in Router to make it DHCP Server
Router>enable
Router#configure terminal
Router(config)#ip dhcp pool my-dhcp-server
Router(dhcp-config)#network 10.0.0.0 255.0.0.0
Router(dhcp-config)#default-router 10.0.0.1
Router(dhcp-config)#dns-server 8.8.8.8
Router(dhcp-config)#exit
  • If you want to exclude some IP addresses enter the following command so that DHCP server avoid giving these address to host
Router(config)#ip dhcp excluded-address 10.0.0.1 10.0.0.10
Thank you

How Configure A Router Fast And Easily By RouterConfigurationCenter

Configuring a router is as simple as having a coffee.. Lemme give the step by step procedure to it.

  1. Open the box and take out the router.
  2. Connect the WAN cable from ISP (Internet Service Provider) to your desktop or laptop, check whether you could able to connect to the internet.. If you can move on to next step or else call your ISP and inform about it.
  3. Now remove the WAN cable from your desktop and connect it to the router.
  4. Power the router, and connect the router and your desktop or laptop using LAN cable.
  5. Open the browser in your system and type 192.168.1.1 in the URL column and press enter.
  6. Now you'll be asking for user name and password for entering into your router. By default the user name and password both are admin. If you using Cisco router leave the username blank and give password as admin.
  7. Now you entered into your router setup page, go to the setup tab in it. And give the username and password which your ISP have you in it, to avoid login page everyone you power it on.. Once it's done save the settings.
  8. Now power off your router as well as your system. Wait for ten seconds and power it on.
  9. First turn on the router then your pc, check for internet light in your router and browse all you want.
  10. If you're using Wi-Fi router I'll recommend you to use WPA2 security settings for encrypting your network.
  11. Voila!
Thank you.. .

Thursday 8 February 2018

Default Router IP Address More List Find here

Default Router IP Address List

Below you may locate your router's IP address. as soon as you recognize that's your router's gateway, kind it into the cope with bar. you'll then have to introduce your person and password logincredentials. in case you're still having troubles read our educational on the way to get a router's IP cope with.

Router Brand

Login IP

2Wire192.168.1.1
192.168.0.1
192.168.1.254
10.0.0.138
3Com192.168.1.1
192.168.1.10.1
Actiontec192.168.1.1
192.168.0.1
192.168.2.1
192.168.254.254
Airlink192.168.1.1
192.168.2.1
Airlive192.168.2.1
Airties192.168.2.1
Apple10.0.1.1
Amped Wireless192.168.3.1
Asus192.168.1.1
192.168.2.1
10.10.1.1
Aztech192.168.1.1
192.168.2.1
192.168.1.254
192.168.254.254
Belkin192.168.1.1
192.168.2.1
10.0.0.2
10.1.1.1
Billion192.168.1.254
10.0.0.2
Buffalo192.168.1.1
192.168.11.1
Dell192.168.1.1
Cisco192.168.1.1
192.168.0.30
192.168.0.50
10.0.0.1
10.0.0.2
D-Link192.168.1.1
192.168.0.1
192.168.0.10
192.168.0.101
192.168.0.30
192.168.0.50
192.168.1.254
192.168.15.1
192.168.254.254
10.0.0.1
10.0.0.2
10.1.1.1
10.90.90.90
Edimax192.168.2.1
Eminent192.168.1.1
192.168.0.1
192.168.8.1
Gigabyte192.168.1.254
Hawking192.168.1.200
192.168.1.254
Huawei192.168.1.1
192.168.0.1
192.168.3.1
192.168.8.1
192.168.100.1
10.0.0.138
LevelOne192.168.0.1
192.168.123.254
Linksys192.168.1.1
192.168.0.1
192.168.1.10
192.168.1.210
192.168.1.254
192.168.1.99
192.168.15.1
192.168.16.1
192.168.2.1
Microsoft192.168.2.1
Motorola192.168.0.1
192.168.10.1
192.168.15.1
192.168.20.1
192.168.30.1
192.168.62.1
192.168.100.1
192.168.102.1
192.168.1.254
MSI192.168.1.254
Netgear192.168.0.1
192.168.0.227
NetComm192.168.1.1
192.168.10.50
192.168.20.1
10.0.0.138
Netopia192.168.0.1
192.168.1.254
Planet192.168.1.1
192.168.0.1
192.168.1.254
Repotec192.168.1.1
192.168.10.1
192.168.16.1
192.168.123.254
Senao192.168.0.1
Siemens192.168.1.1
192.168.0.1
192.168.1.254
192.168.2.1
192.168.254.254
10.0.0.138
10.0.0.2
Sitecom192.168.0.1
192.168.1.254
192.168.123.254
10.0.0.1
SMC Networks192.168.1.1
192.168.0.1
192.168.2.1
10.0.0.1
10.1.10.1
Sonicwall192.168.0.3
192.168.168.168
SpeedTouch10.0.0.138
192.168.1.254
Sweex192.168.15.1
192.168.50.1
192.168.55.1
192.168.251.1
Tenda192.168.1.1
192.168.0.1
Thomson192.168.0.1
192.168.1.254
192.168.100.1
TP-Link192.168.1.1
192.168.0.1
192.168.0.254
Trendnet192.168.1.1
192.168.0.1
192.168.0.30
192.168.0.100
192.168.1.100
192.168.1.254
192.168.10.1
192.168.10.10
192.168.10.100
192.168.2.1
192.168.223.100
200.200.200.5
U.S. Robotics192.168.1.1
192.168.2.1
192.168.123.254
Zoom192.168.1.1
192.168.2.1
192.168.4.1
192.168.10.1
192.168.1.254
10.0.0.2
10.0.0.138
ZTE192.168.1.1
192.168.0.1
192.168.100.100
192.168.1.254
192.168.2.1
192.168.2.254
Zyxel192.168.1.1
192.168.0.1
192.168.2.1
192.168.4.1
192.168.10.1
192.168.1.254
192.168.254.254
10.0.0.2
10.0.0.138

Default Router IP Address List Please Check it

Default Router Username and Password 

List

First Choose your router from the list below in order to see its default username and password. If you don't know your router's IP address you can Check it
Here are some popular router's credential information.

Router Brand

Login IP

Username

Password

3Comhttp://192.168.1.1adminadmin
Belkinhttp://192.168.2.1adminadmin
BenQhttp://192.168.1.1adminadmin
D-Linkhttp://192.168.0.1adminadmin
Digicomhttp://192.168.1.254adminmichelangelo
Digicomhttp://192.168.1.254userpassword
Linksyshttp://192.168.1.1adminadmin
Netgearhttp://192.168.0.1adminpassword
Sitecomhttp://192.168.0.1sitecomadmin
Thomsonhttp://192.168.1.254useruser
US Roboticshttp://192.168.1.1adminadmin

Wednesday 7 February 2018

192.168.1.1 Router Configuration Center

192.168.1.1 Admin Login

192.168.1.1 router admin passwords and login ip192.168.1.1 is an IP address which routers like Linksys and other community manufacturers use as an get admission to factor or gateway. corporations set up router admin get admission to on this address to permit network directors to configure their routers and networks. Concretely you'll manipulate security alternatives, network control, IP QoS, DNS, proxy, LAN, WAN, WLAN settings, DSL, ADSL, MAC, WPS block; among others.

How to login 192.168.1.1 in 5 easy steps

Getting access to your router admin thru a 192.168.l.l IP deal with will permit you to trade the settings and configurations that your router software program presents.
click on right here http://192.168.1.1 or input 192.168.1.1 into your browser's address bar.
in case you're getting an errors, then 19216811 is not your router's IP address. appearance up yourrouter's IP address within the following article.
as soon as you understand your router's IP address introduce it into your browser's URL address. you will be directed to the consumer login panel. There introduce your router consumer and password.
if you forgot your username and password you could observe those commands to recover them. If you have not changed the default consumer and password that incorporates the router you can consult our router default usernames and passwords listing.
once you're inside the router's admin panel you may be capable of alter and exchange all net settings.

Router Username and Password List Given Under

If you haven't modified your router's username and password. the subsequent list offers the default credentials. click your router from the list below:

How to find your router's IP address

if you're having troubles accessing your router at 192.168.1.1 (long loading or not loading at all), your community is probably the use of some other addess including 192.168.0.1, 10.0.0.1 or 192.168.2.1. if so take a look at our router IP address listing. you could also examine our educational on a way to find your router's ip deal with for greater assist.

How do You set up a DHCP in a Cisco router?

The Dynamic Host Configuration Protocol (DHCP)  is a standardized network protocol used on Internet Protocol (IP) networks for dynamically...